您好,歡迎訪問江蘇博景工程有限公司!專業承接鹽城及周邊地區的環氧地坪工程??!

              鹽城環氧地坪

              地坪 更環保更安全

              環氧地坪施工

              流程嚴謹、匠心工藝

              全國咨詢熱線

              135-1514-8577

              江蘇博景工程有限公司
              您的位置:首頁 > 資訊動態 > 地坪知識

              聯系我們

              地址:鹽城鹽南高新區新河街道辦事處新墩社區新園路96號

              咨詢熱線:

              135-1514-8577

              135-1514-8577

              鹽城防靜電地坪施工基面處理的三種常用方法

              發布時間:2019-04-29人氣:23

              鹽城防靜電地坪施工基礎地面處理(水泥地面做無錫防靜電地坪前進行打磨處理的目的)是指地面油污、潮氣、灰塵等污物的清理,包括除去地面油污灰塵、干燥地面、修補地面裂縫、凹坑,形成清潔平整的無錫防靜電地坪施工基面,基礎地面處理工作是無錫防靜電地坪施工工藝的第一步,也是非常重要的一步,直接決定無錫防靜電地坪的施工效果以及無錫防靜電地坪的使用壽命?;嫣幚沓S玫姆椒òú捎檬止で謇?、拋射磨料清理、高壓水表面處理。 The purpose of ground treatment of epoxy floor paint construction foundation (ground treatment before cement floor paint) refers to the cleaning of ground grease, moisture, dust and other dirt, including removing ground grease dust, drying ground, repairing ground cracks and pits, forming a clean and flat epoxy floor paint construction base surface. The ground treatment of foundation is the first step in the construction process of epoxy floor paint. It is also a very important step, which directly determines the construction effect of epoxy floor paint and the service life of epoxy floor paint. The common methods of base surface treatment include manual cleaning, abrasive ejection cleaning and high pressure water surface treatment. 1、手工清理

              1. Manual cleaning 

              手工清理主要是施工人員借助刷子或者使用角磨機等小型動力工具來清清除地面污物(無錫防靜電地坪施工前地面油污清除方法)。角磨機主要是依靠電機帶動鋼磨片、砂輪等打磨件打磨需要涂裝地坪漆的地面,以清除地表污物。這種方法靈活度較大,但設備噪聲大,對操作人員的健康和環境影響較大。Manual cleaning is mainly done by the builder with the help of brushes or small power tools such as angle mills to clean up the ground dirt (floor paint before construction of the ground oil removal method). Angle mill mainly relies on motor to drive steel grinding discs, grinding wheels and other grinding parts to grind the ground, which needs to be coated with floor paint to remove surface dirt. This method is flexible, but the equipment noise is large, which has a great impact on the health and environment of operators. 

              角磨機的工作原理是依靠電擊告訴旋轉或往復運動,帶動打磨磨片磨削或打擊需要涂裝的基面,達到清除表面雜物的目的。

              The working principle of angle grinder is to drive the grinding disc to grind or strike the base surface which needs to be coated by electric shock to tell the rotation or reciprocating movement, so as to achieve the purpose of removing surface debris. 

              一般將角磨機的磨片瓶貼于地面進行打磨。對于特殊的異物和凸起等不易清除物,要使角磨片與地面保持15°-30°的角度,以便更好地打磨和清理。

              Generally, the flask of the angle mill is attached to the ground for polishing. For special foreign bodies and bulges which are not easy to remove, the angle between the angular grinding disc and the ground should be kept at 15 - 30, so as to better polish and clean up. 

              2、拋射磨料處理

              2. Abrasive treatment by ejection 

              拋射磨料處理也稱拋丸處理,它能利用葉輪將砂、丸、鋼絲段等磨料高速拋向目標地面,打擊磨削地面,迅速準確地除去污物。拋射磨料處理后的地面有均勻的粗糙度,同時其粉塵回收裝置可以大大降低施工場地的粉塵污染。

              Abrasive projection treatment is also called shot blasting treatment. It can use impeller to throw abrasives such as sand, shot, steel wire segment onto the target ground at high speed, strike the ground and remove dirt quickly and accurately. The ground treated by abrasive ejection has uniform roughness, and its dust recovery device can greatly reduce the dust pollution of construction site. 

              拋丸處理的優勢在于無錫防靜電地坪施工前,拋丸處理不但能迅速準確地除去舊涂膜和污物,而且經拋丸處理后,地坪表面清理質量均勻,呈現均勻粗糙度,可以提高涂裝時涂層的附著力,延長涂料使用壽命。拋丸后,地坪表面受彈丸沖擊,會暴露出地板隱藏的裂縫等,可以起到全面檢查基面質量的效果。

              The advantage of shot blasting treatment is that before the construction of epoxy floor paint, shot blasting treatment can not only quickly and accurately remove the old coating film and dirt, but also after shot blasting treatment, the surface cleaning quality of the floor is uniform, showing uniform roughness, which can improve the adhesion of the coating and prolong the service life of the coating. After shot blasting, the surface of the floor will be impacted by projectiles, which will expose hidden cracks in the floor, and so on. It can play a comprehensive inspection of the quality of the base surface. 

              由于配備粉塵回收裝置,因此工作周圍環境衛生較好,既有利于避免污染環境,又有利于改善勞動條件,有利于操作工人的身體健康。

              Because of equipped with dust recovery device, the environment around the work is better, which is conducive not only to avoid polluting the environment, but also to improve the working conditions, and is conducive to the health of the operators. 

              3、高壓射流處理

              3、高壓射流處理 

              高壓水表面處理利用高壓水射流技術,產生150至250MPa的超高壓純水或高壓水磨料射流,在其沖刷力的作用下將地面清理干凈。

              High-pressure water surface treatment uses high-pressure water jet technology to produce 150 to 250 MPa ultra-high pressure pure water or high-pressure water abrasive jet, which will clean the ground under the action of its scouring force. 


              辛苦整理!轉載請注明來自 http://www.publicuniversityonline.com/show.asp?id=58
              網友評論

              管理員

              該內容暫無評論

              北美地區網友

              推薦資訊

              《AV午夜福利一片免费看久久》 完整版其他片在线观看